Appeal No. 96-1854 Application No. 08/067,992 video cassette recorder/player. A transcript of the deposition is also maintained in software form in the computer. When a videotaped deposition is initially processed by the video transcript retriever, a timecode numerical address or designation control signal from the timecode generator/reader is recorded onto the control track 56 (Figure 4A) of the videotape. As seen in Figure 4A, the timecode numerical address signals 58a through 58e are located at intervals of 1/30 of a second along control track 56. Once the control track 56 has been recorded on the videotape, a numerical designation for each segment of the tape corresponding to the beginning of each deposition question is transferred from the software controlling the timecode generator/reader and videocassette recorder/player to the software containing the deposition transcript and correlated therewith. As illustrated in Figure 4B, for example, the mark 62 adjacent to the question Q on the software version of the deposition transcript corresponds to one of the timecode numerical addresses 58a through 58e on control track 56. In order to display a specific question and answer on the videotape, the software version of the deposition transcript is searched for the key words of the desired question and answer. When the desired question and answer is located on the software version of 4Page: Previous 1 2 3 4 5 6 7 8 NextLast modified: November 3, 2007