41-2065. Powers and duties; definition
(L14, Ch. 132, sec. 1. Eff. until 7/1/16)
A. The department shall:
1. Maintain custody of the state reference standards of weights and measures that are traceable to the United States prototype standards and that are supplied to the states by the federal government or that are otherwise approved as being satisfactory by the national institute of standards and technology.
2. Keep the state reference standards in a safe and suitable place in the metrology laboratory of the department and ensure that they shall not be removed from the laboratory except for repairs or for calibration as may be prescribed by the national institute of standards and technology.
3. Keep accurate records of all standards and equipment.
4. Adopt any rules necessary to carry out this chapter and adopt reasonable rules for the enforcement of this chapter. These rules have the force and effect of law and shall be adopted pursuant to chapter 6 of this title. In adopting these rules, the director shall consider, as far as is practicable, the requirements established by other states and by authority of the United States, except that rules shall not be made in conflict with this chapter.
5. Publish rules adopted pursuant to this chapter and issue appropriate copies at no cost to all new applicants for licensure and certification. Updated copies of the rules shall be distributed, on request, at no cost to the public.
6. Investigate complaints made to the department concerning violations of this chapter and, on its own initiative, conduct investigations it deems appropriate to develop information relating to prevailing procedures in commercial quantity determination and relating to possible violations of this chapter, and in order to promote the general objective of accuracy in the determination and representation of quantity in commercial transactions.
7. Establish labeling standards, establish standards of weight, measure or count and establish reasonable standards of fill for any packaged commodity, and may establish standards for open dating information.
8. Grant, pursuant to this chapter, exemptions from the licensing provisions of this chapter for weighing and measuring instruments, standards or devices when the ownership or use of the instrument or device is limited to federal, state or local government agencies in the performance of official functions. On request, the department may conduct inspections of the instruments, standards or devices and shall charge a fee pursuant to section 41-2092, subsection B.
9. Delegate to appropriate personnel any of the responsibilities of the director for the proper administration of this chapter.
10. Inspect and test weights and measures kept, offered or exposed for sale.
11. Inspect and test, to ascertain if they are correct, weights and measures commercially used either:
(a) In determining the weight, measure or count of commodities or things sold, or offered or exposed for sale, on the basis of weight, measure or count.
(b) In computing the basic charge or payment for services rendered on the basis of weight, measure or count.
12. Test, at random, commodities, weights and measures used in public institutions for which monies are appropriated by the legislature. The testing of commodities, weights and measures in public institutions shall include, but not be limited to, items:
(a) That have historically been of short weight, measure or count.
(b) Found to be of short weight, measure or count by other jurisdictions.
(c) To be tested as part of a regional or national survey.
13. Test, approve for use and affix a seal of approval for use of all weights, measures and commercial devices manufactured in or brought into this state as it finds to be correct and shall reject and mark as rejected weights, measures and devices it finds to be incorrect. Weights, measures and devices that have been rejected may be seized by the department if not corrected within the time specified or if used or disposed of in a manner not specifically authorized. The department shall condemn and may seize weights, measures and devices that are found to be incorrect and that are not capable of being made correct.
14. Sample and test motor fuel that is stored, sold or exposed or offered for sale or that is stored for use by a fleet owner to determine whether the motor fuel meets the standards for motor fuel set forth in section 41-2083 and article 6 of this chapter and in any rule adopted by the director pursuant to this chapter. For the purposes of this paragraph, " fleet owner" has the same meaning prescribed in section 41-2121.
15. Randomly witness tests on all mandated vapor recovery systems that are installed or operated in this state and if the systems are determined to be in compliance with the law approve those systems for use and reject, mark as rejected and stop the use of those systems determined not to be in compliance with the law.
16. Inspect facilities at which motor fuel is stored, sold or exposed or offered for sale to determine whether dispensing devices are properly labeled.
17. Publish and distribute to consumers weighing and measuring information.
18. Weigh, measure or inspect commodities kept, offered or exposed for sale, sold or in the process of delivery to determine whether they contain the amounts represented and whether they are kept, offered or exposed for sale in accordance with this chapter or rules adopted pursuant to this chapter. In carrying out this section, the director shall employ recognized sampling procedures, such as are designated in appropriate national institute of standards and technology handbooks and supplements to those handbooks, except as modified or rejected by rule.
19. Allow reasonable variations from the stated quantity of contents only after a commodity has entered intrastate commerce. These variations shall include those caused by loss or gain of moisture during the course of good distribution practice or by unavoidable deviations in good manufacturing practice.
20. Prescribe the standards of weight and measure and additional equipment methods of test and inspection to be employed in the enforcement of this chapter. The director may prescribe or provide the official test and inspection forms to be used in the enforcement of this chapter.
21. Apply to any court of competent jurisdiction for a temporary or permanent injunction restraining any person from violating this chapter.
22. Report to the governor on August 1 each year and at such other times as may be required on the work accomplished under this chapter.
23. Subject to chapter 4, article 4 of this title, employ such personnel as needed to assist in administering this chapter.
24. Ensure that any information that is required to be filed with the department, that relates to the contents of motor fuels that are sold in this state and that is a trade secret as defined in section 49-201 is not disclosed.
25. Establish by rule labeling standards for tanks and containers of motor fuels.
B. The director may provide for the periodic examination and inspection of metering devices, including but not limited to devices utilized to measure usage of electricity, natural gas or water by a consumer. Examination and inspection authority shall not apply to metering devices owned by federal, state or local government agencies unless requested by the government agency that owns the metering devices.
C. The director may establish standards for the presentation of cost-per-unit information. Nothing in this subsection shall be construed to mandate the use of cost-per-unit information in connection with the sale of any standard packed commodity.
D. The director, when necessary to carry out this chapter, may adopt and enforce rules relating to quality standards for motor fuel, kerosene, oil, except used oil fuel, and hazardous waste fuel, lubricating oils, lubricants, antifreeze and other liquid or gaseous fuels. The director shall adopt rules to assure that oxygenated fuels, as described in article 6 of this chapter, stored, used, sold or exposed or offered for use or sale are blended and stored, sold, exposed or offered in such a manner as to assure that the oxygenated fuels are properly blended, that they meet the standards set forth in section 41-2083 and article 6 of this chapter, and in rules adopted pursuant to this chapter, and that dispensers at which the oxygenated fuels are dispensed are labeled as defined by rule of the department in such a manner as to notify persons of the type of oxygenated fuel being dispensed and the maximum percentage of oxygenate by volume contained in the oxygenated fuel. The director of the department of weights and measures shall consult with the director of the department of environmental quality in adopting rules pursuant to this subsection.
E. Testing and inspection conducted pursuant to this chapter shall be done, to the extent practicable, without prior notice, by a random systematic method determined by the director or in response to a complaint by the public. The testing and inspection may be done by private persons and firms pursuant to contracts entered into by the director in accordance with chapter 23 of this title or by a registered service agency or registered service representative licensed pursuant to section 41-2094. The director shall establish qualifications of persons and firms for selection for purposes of this subsection. The persons or firms conducting the testing and inspection shall immediately report to the department any violations of this chapter and incorrect weights, measures, devices, vapor recovery systems or vapor recovery components for investigation and enforcement by the department. A person or firm that tests or inspects a weight, measure, device, vapor recovery system or vapor recovery component that is rejected shall not correct the defect causing the rejection without the permission of the department.
F. During the course of an investigation or an enforcement action by the department, information regarding the complainant is confidential and is exempt from title 39, chapter 1, unless the complainant authorizes the information to be public.
G. For the purposes of the labeling requirements prescribed in this section, " oxygenated fuel" means a motor fuel blend containing 1.5 per cent or more by weight of oxygen.
Section: Previous 41-2022 41-2051 41-2052 41-2061 41-2062 41-2063 41-2064 41-2065 41-2066 41-2067 41-2068 41-2069 41-2081 41-2082 41-2083 NextLast modified: October 13, 2016