Ex parte RAMUN - Page 7




          Appeal No. 2000-1488                                       Page 7           
          Application No. 08/826,832                                                  


          suitable receptacle in a desirable location for weights to                  
          help maintain the rear end of the tractor on the ground                     
          despite heavy front loads.  A specific feature of the                       
          attachment is that it may be added to an existing tractor,                  
          already equipped with a drawbar or hitch panel at the ends of               
          the frame rails, without loss of the existing drawbar or hitch              
          plate                                                                       
          and without loss of the hitching feature.                                   


               Figure 3 of Eid is a perspective view of the attachment                
          and Figures 4 and 5 are views showing the attachment in place               
          between the frame rails and the drawbar or hitch plate.  As                 
          shown in Figures 3-5, the weight box attachment is a unitary,               
          preassembled, three-sided, closed-bottom, open-top,                         
          heavy-gauge sheet metal box 40 adapted to be applied as an                  
          attachment unit to the free ends of the rails 20, these rails               
          being normally connected by the hitch plate 22.  The box 40                 
          comprises a front plate 42, a bottom plate 44, and two side                 
          plates 46.  The latter extend well forward of the front plate               
          to provide short parallel wings 48 enabling the box to be                   
          secured to the ends 20 of the rails by the same bolts 28 as                 







Page:  Previous  1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  Next 

Last modified: November 3, 2007