As used in ORS 517.702 to 517.989, unless the context requires otherwise:
(1) “Board” means the governing board of the State Department of Geology and Mineral Industries.
(2) “Completion” means termination of surface mining activities including reclamation of the surface-mined land in accordance with the approved reclamation plan and operating permit.
(3) “Department” means the State Department of Geology and Mineral Industries.
(4) “Exploration” means all activities conducted on or beneath the surface of the earth for the purpose of determining presence, location, extent, grade or economic viability of a deposit. “Exploration” does not include prospecting or chemical processing of minerals.
(5) “Explorer” means, notwithstanding the provisions of ORS 517.810 (2), any individual, public or private corporation, political subdivision, agency, board or department of this state, any municipality, partnership, association, firm, trust, estate or any other legal entity whatsoever that is engaged in exploration.
(6) “Landowner” means:
(a) The person possessing fee title to the natural mineral deposit being surface mined or explored; and
(b) The owner of an equitable interest in land that is subject to a deed of trust.
(7) “Minerals” includes soil, coal, clay, stone, sand, gravel, metallic ore and any other solid material or substance excavated for commercial, industrial or construction use from natural deposits situated within or upon lands in this state.
(8) “Operator” means any individual, public or private corporation, political subdivision, agency, board or department of this state, any municipality, partnership, association, firm, trust, estate or any other legal entity whatsoever that is engaged in surface mining operations.
(9) “Overburden” means the soil, rock and similar materials that lie above natural deposits of minerals.
(10) “Person” means any person, any federal agency or any public body, as defined in ORS 174.109.
(11) “Processing” includes, but is not limited to, crushing, washing, milling and screening as well as the batching and blending of mineral aggregate into asphalt and portland cement concrete located within the operating permit area.
(12) “Reclamation” means the employment in a surface mining operation or exploration of procedures reasonably designed to:
(a) Minimize, as much as practicable, the adverse effects of the surface mining operation or exploration on land, air and water resources; and
(b) Provide for the rehabilitation of surface resources adversely affected by the surface mining operations or exploration through the rehabilitation of plant cover, soil stability and water resources and through other measures that contribute to the subsequent beneficial use of the explored, mined or reclaimed lands.
(13) “Reclamation plan” means a written proposal, submitted to the department as required by ORS 517.702 to 517.989 and subsequently approved by the department as provided in ORS 517.702 to 517.989, for the reclamation of the land area adversely affected by a surface mining operation or exploration and including, but not limited to the following information:
(a) Proposed measures to be undertaken by the operator in protecting the natural resources of adjacent lands.
(b) Proposed measures for the rehabilitation of the explored or surface-mined lands and the procedures to be applied.
(c) The procedures to be applied in the surface mining operation or exploration to control the discharge of contaminants and the disposal of surface mining refuse.
(d) The procedures to be applied in the surface mining operation or exploration in the rehabilitation of affected stream channels and stream banks to a condition minimizing erosion, sedimentation and other factors of pollution.
(e) The map required by ORS 517.790 (1)(e) and such other maps and supporting documents as may be requested by the department.
(f) A proposed time schedule for the completion of reclamation operations.
(g) Requirements of the exploration permit.
(14) “Surface impacts of underground mining” means all waste materials produced by underground mining and placed upon the surface including, but not limited to, waste dumps, mill tailings, washing plant fines and all surface subsidence related to underground mining.
(15)(a) “Surface mining” includes all or any part of the process of mining minerals by the removal of overburden and the extraction of natural mineral deposits thereby exposed by any method by which more than 5,000 cubic yards of minerals are extracted or by which at least one acre of land is affected within a period of 12 consecutive calendar months, including open-pit mining operations, auger mining operations, processing, surface impacts of underground mining, production of surface mining refuse and the construction of adjacent or off-site borrow pits (except those constructed for use as access roads).
(b) “Surface mining” does not include:
(A) Excavations of sand, gravel, clay, rock or other similar materials conducted by the landowner or tenant for the primary purpose of construction, reconstruction or maintenance of access roads on the same parcel or on an adjacent parcel that is under the same ownership as the parcel that is being excavated;
(B) Excavation or grading operations reasonably necessary for farming;
(C) Nonsurface effects of underground mining; or
(D) Removal of rock, gravel, sand, silt or other similar substances removed from the beds or banks of any waters of this state pursuant to a permit issued under ORS 196.800 to 196.900.
(16) “Surface mining refuse” means all waste materials, soil, rock, mineral, liquid, vegetation and other materials resulting from or displaced by surface mining operations within the operating permit area, including all waste materials deposited in or upon lands within the operating permit area.
(17) “Underground mining” means all human-made excavations below the surface of the ground through shafts or adits for the purpose of exploring for, developing or producing valuable minerals. [1971 c.719 §2; 1975 c.724 §1; 1977 c.59 §1; 1981 c.622 §1; 1983 c.46 §1; 1985 c.292 §2; 1989 c.347 §12; 1999 c.353 §2; 2007 c.318 §5]
Note: Definitions for 517.702 to 517.989 are also found in 517.952.
Section: Previous 517.710 517.715 517.720 517.725 517.730 517.735 517.740 517.750 517.755 517.760 517.770 517.775 517.780 517.785 517.790 NextLast modified: August 7, 2008