§ 46.2-1979. Warranty obligations
A. Each T&M vehicle manufacturer, factory branch, distributor, or distributor branch shall (i) specify in writing to each of its T&M vehicle dealers licensed in the Commonwealth the dealer's obligations for preparation, delivery, and warranty service on its products and (ii) compensate the dealer for warranty parts, service and diagnostic work required of the dealer by the manufacturer or distributor as follows:
1. Compensation of a dealer for warranty parts, service and diagnostic work shall not be less than the amounts charged by the dealer for the manufacturer's or distributor's original parts, service and diagnostic work to retail customers for nonwarranty service, parts and diagnostic work installed or performed in the dealer's service department unless the amounts are not reasonable;
2. For purposes of determining warranty parts and service compensation, menu-priced parts or services, group discounts, special event discounts, and special event promotions shall not be considered in determining amounts charged by the dealer to retail customers;
3. Increases in dealer warranty parts and service compensation and diagnostic work compensation, pursuant to this section, shall be requested by the dealer in writing, shall be based on 100 consecutive repair orders or all repair orders over a ninety-day period, whichever occurs first and, in the case of parts, shall be stated as a percentage of markup which shall be uniformly applied to all the manufacturer's or distributor's parts;
4. In the case of warranty parts compensation, the provisions of this subsection shall be effective only for model year 1992 and succeeding model years;
5. If a manufacturer or distributor furnishes a part to a dealer at no cost for use by the dealer in performing work for which the manufacturer or distributor is required to compensate the dealer under this section, the manufacturer or distributor shall compensate the dealer for the part in the same manner as warranty parts compensation, less the wholesale costs, for such part as listed in the manufacturer's current price schedules. A manufacturer or distributor may pay the dealer a reasonable handling fee instead of the compensation otherwise required by this subsection for special high-performance complete engine assemblies in limited production T&M vehicles which constitute less than five percent of model production furnished to the dealer at no cost, if the manufacturer or distributor excludes such special high-performance complete engine assemblies in determining whether the amounts requested by the dealer for warranty compensation are consistent with the amounts that the dealer charges its other retail service customers for parts used by the dealer to perform similar work; or
6. In the case of service work, manufacturer original parts or parts otherwise specified by the manufacturer or distributor, and parts provided by a dealer either pursuant to an adjustment program as defined in § 59.1-207.34 or as otherwise requested by the manufacturer or distributor, the dealer shall be compensated in the same manner as for warranty service or parts.
This section does not apply to compensation for parts such as components, systems, fixtures, appliances, furnishings, accessories, and features that are designed, used, and maintained primarily for nonvehicular, residential purposes. Warranty audits of dealer records may be conducted by the manufacturer, factory branch, distributor, or distributor branch on a reasonable basis, and dealer claims for warranty compensation shall not be denied except for good cause, such as performance of nonwarranty repairs, lack of material documentation, fraud, or misrepresentation. Claims for dealer compensation shall be paid within thirty days of dealer submission or within thirty days of the end of an incentive program or rejected in writing for stated reasons. The manufacturer, factory branch, distributor, or distributor branch shall reserve the right to reasonable periodic audits to determine the validity of all such paid claims for dealer compensation. Any chargebacks for warranty parts or service compensation and service incentives shall only be for the twelve-month period immediately following the date of the claim and, in the case of chargebacks for sales compensation only, for the eighteen-month period immediately following the date of claim. However, such limitations shall not be effective in the case of intentionally false or fraudulent claims.
B. It shall be unlawful for any T&M vehicle manufacturer, factory branch, distributor, or distributor branch to:
1. Fail to perform any of its warranty obligations, including tires, with respect to a T&M vehicle;
2. Fail to assume all responsibility for any liability resulting from structural or production defects;
3. Fail to include in written notices of factory recalls to T&M vehicle owners and dealers the expected date by which necessary parts and equipment will be available to dealers for the correction of defects;
4. Fail to compensate any of the T&M vehicle dealers licensed in the Commonwealth for repairs effected by the dealer of merchandise damaged in manufacture or transit to the dealer where the carrier is designated by the manufacturer, factory branch, distributor, or distributor branch;
5. Fail to compensate its T&M vehicle dealers licensed in the Commonwealth for warranty parts, work, and service pursuant to subsection A of this section, or for legal costs and expenses incurred by such dealers in connection with warranty obligations for which the manufacturer, factory branch, distributor, or distributor branch is legally responsible or which the manufacturer, factory branch, distributor, or distributor branch imposes upon the dealer;
6. Misrepresent in any way to purchasers of T&M vehicles that warranties with respect to the manufacture, performance, or design of the T&M vehicle are made by the dealer, either as warrantor or co-warrantor;
7. Require the dealer to make warranties to customers in any manner related to the manufacture, performance, or design of the T&M vehicle; or
8. Shift or attempt to shift to the T&M vehicle dealer, directly or indirectly, any liabilities of the manufacturer, factory branch, distributor or distributor branch under the Virginia Motor Vehicle Warranty Enforcement Act (§ 59.1-207.9 et seq.), unless such liability results from the act or omission by the dealer.
C. Notwithstanding the terms of any franchise, it shall be unlawful for any T&M vehicle manufacturer, factory branch, distributor, or distributor branch to fail to indemnify and hold harmless its T&M vehicle dealers against any losses or damages arising out of complaints, claims, or suits relating to the manufacture, assembly, or design of T&M vehicles, parts, or accessories, or other functions by the manufacturer, factory branch, distributor, or distributor branch beyond the control of the dealer, including, without limitation, the selection by the manufacturer, factory branch, distributor, or distributor branch of parts or components for the T&M vehicle or any damages to merchandise occurring in transit to the dealer where the carrier is designated by the manufacturer, factory branch, distributor, or distributor branch. The dealer shall notify the manufacturer of pending suits in which allegations are made which come within this subsection whenever reasonably practicable to do so. Every T&M vehicle dealer franchise issued to, amended, or renewed for T&M vehicle dealers in Virginia shall be construed to incorporate provisions consistent with the requirements of this subsection.
D. On any new T&M vehicle, any uncorrected damage or any corrected damage exceeding three percent of the manufacturer's or distributor's suggested retail price as defined in 15 U.S.C. §§ 1231-1233, as measured by retail repair costs, must be disclosed to the dealer in writing prior to delivery. Factory mechanical repair and damage to glass, tires, and bumpers are excluded from the three percent rule when properly replaced by identical manufacturer's or distributor's original equipment or parts. Whenever a new T&M vehicle is damaged in transit, when the carrier or means of transportation is determined by the manufacturer or distributor, or whenever a T&M vehicle is otherwise damaged prior to delivery to the new T&M vehicle dealer, the new T&M vehicle dealer shall:
1. Notify the manufacturer or distributor of the damage within three business days from the date of delivery of the new T&M vehicle to the new T&M vehicle dealership or within the additional time specified in the franchise; and
2. Request from the manufacturer or distributor authorization to replace the components, parts, and accessories damaged or otherwise correct the damage, unless the damage to the T&M vehicle exceeds the three percent rule, in which case the dealer may reject the vehicle within three business days.
E. If the manufacturer or distributor refuses or fails to authorize correction of such damage within ten days after receipt of notification, or if the dealer rejects the T&M vehicle because damage exceeds the three percent rule, ownership of the new T&M vehicle shall revert to the manufacturer or distributor, and the new T&M vehicle dealer shall have no obligation, financial or otherwise, with respect to such T&M vehicle. Should either the manufacturer, distributor, or the dealer elect to correct the damage or any other damage exceeding the three percent rule, full disclosure shall be made by the dealer in writing to the buyer and an acknowledgment by the buyer is required. If there is less than three percent damage, no disclosure is required, provided the damage has been corrected. Predelivery mechanical work shall not require a disclosure. Failure to disclose any corrected damage within the knowledge of the selling dealer to a new T&M vehicle in excess of the three percent rule shall constitute grounds for revocation of the buyer order, provided that, within thirty days of purchase, the T&M vehicle is returned to the dealer with an accompanying written notice of the grounds for revocation. In case of revocation pursuant to this section, the dealer shall accept the T&M vehicle and refund any payments made to the dealer in connection with the transaction, less a reasonable allowance for the consumer's use of the vehicle as defined in § 59.1-207.11.
F. If there is a dispute between the manufacturer, factory branch, distributor, or distributor branch and the dealer with respect to any matter referred to in subsection A, B, or C of this section, either party may petition the Commissioner in writing, within thirty days after either party has given written notice of the dispute to the other, for a hearing. The decision of the Commissioner shall be binding on the parties, subject to rights of judicial review and appeal as provided in Chapter 40 (§ 2.2-4000 et seq.) of Title 2.2. However, nothing contained in this section shall give the Commissioner any authority as to the content or interpretation of any manufacturer's or distributor's warranty.
(1995, cc. 767, 816; 1996, cc. 453, 1043, 1052.)
Sections: Previous 46.2-1972 46.2-1973 46.2-1974 46.2-1975 46.2-1976 46.2-1977 46.2-1978 46.2-1979 46.2-1980 46.2-1981 46.2-1982 46.2-1983 46.2-1984 46.2-1985 46.2-1986 NextLast modified: April 16, 2009