§ 46.37.369. Wheels and front suspension
(1) No vehicle shall be equipped with wheel nuts, hub caps, or wheel discs extending outside the body of the vehicle when viewed from directly above which:
(a) Incorporate winged projections; or
(b) Constitute a hazard to pedestrians and cyclists.
For the purposes of this section, a wheel nut is defined as an exposed nut which is mounted at the center or hub of a wheel, and is not one of the ordinary hexagonal nuts which secure a wheel to an axle and are normally covered by a hub cap or wheel disc.
(2) Tire rims and wheel discs shall have no visible cracks, elongated bolt holes, or indications of repair by welding. In addition, the lateral and radial runout of each rim bead area shall not exceed one-eighth of an inch of total indicated runout.
(3) King pins or ball joints shall not be worn to the extent that front wheels tip in or out more than one-quarter of an inch at the lower edge of the tire.
[1977 ex.s. c 355 § 30.]
Notes:
Severability -- 1977 ex.s. c 355: See note following RCW 46.37.010.
Lowering vehicle below legal clearance: RCW 46.61.680. Sections: Previous 46.37.310 46.37.320 46.37.330 46.37.340 46.37.351 46.37.360 46.37.365 46.37.369 46.37.375 46.37.380 46.37.390 46.37.395 46.37.400 46.37.410 46.37.420 Next
Last modified: April 7, 2009