Interference No. 103,435
date. We do not agree. The Fencil notebook clearly states
that disc or optics were attached to loops or haptics:
Molds were made in the form of discs with
grooves for loops.
The disc was 1 cm. in diameter. The loop
grooves were the same size as the loop
grooves on lens molds.
Loops were made in the normal S1-20B
configuration and also without the accu-
anchor. . .
Both types of loops protruded into the mold
(an also the lens) approximately 040". . .
The loops were plasma treated under the
following condition:
80 watts
30 minutes
13.8 MegaHertz
Immediately after the plasma treatment, the
loops were removed to air and placed in the
molds. Silicone (LSM-1) was added, the
molds closed and clamped. This operation,
for all ten molds took 30 minutes. The
silicone was cured for 15 minutes at 150 C
then removed from the oven and cooled in
water. [Christ Exhibit 16]
23
Page: Previous 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Next
Last modified: November 3, 2007