Ex Parte BEISEL et al - Page 6




             Appeal No. 2001-1214                                                               Page 6                
             Application No. 09/213,726                                                                               


             distributing rollers during operation of the press. More particularly, means are provided                
             for selectively changing the location of the first pivot 29, and thereby, the manner in                  
             which the rocker member 26 acts on the lever 34 in response to driving movement of                       
             the link 21.  As best seen from viewing Figures 1 and 2, the amplitude of the                            
             reciprocating movement of the rocker 26 depends upon the location of the rocker pivot                    
             29.  Thus, the magnitude of the oscillations of the lever 34 can be varied by adjusting                  
             the location of the rocker pivot 29.  To this end, the two-armed lever 28 is rotatably                   
             mounted on a support shaft 55.  To rotate the lever 28 about the shaft 55, a threaded                    
             spindle 58 is captively mounted on the frame 11 by means of a bracket 59 secured to                      
             the frame 11 by bolts 60.  The spindle 58 is rotatably maintained in the bracket 59 by                   
             means of bushings 61 and a snap ring 62.  A traveling nut 64 is threadably received on                   
             the spindle 58 so as to be movable along the length of the spindle 58 in response to the                 
             rotation thereof.  A threaded stud 65 extends from the nut 64 through the arm 28b of                     
             the lever 28 and is secured thereto by a nut 66.  Thus, as the traveling nut 64 moves                    
             along the length of the threaded spindle 58 in response to rotation of the spindle, the                  
             lever arm 28b, and thus the lever 28, will rotate about the axis of the shaft 55.                        
             Consequently, the arm 28a of the lever 28 will rotate about the axis of the support shaft                
             55 to adjust the location of the rocker pivot 29.   To facilitate the manual rotation of the             
             threaded spindle 58, a knob 68 is secured to the spindle 58 externally of the press                      
             frame.  The knob 68 may have graduations thereon so that the press operator can                          








Page:  Previous  1  2  3  4  5  6  7  8  9  10  11  Next 

Last modified: November 3, 2007