Appeal No. 2002-1468 Application 09/038,219 spatial-temporal dithering unit 50. The spatial-temporal dither signal is the sum of a signal from random value source 53 and a temporal dither table 54. See page 14 of Appellants’ specification. A temporal dither may be accomplished by defining a 4x4 spatial pattern block that changes on a frame-by-frame basis and repeats every 4 frames. The following illustrates an example of such a pattern. The values A, B, C, and D represent the dither values 0.0, 0.25, 0.5, and 0.75, respectively. The pattern has a spatial variation to eliminate flicker. Each frame includes all four dither values, with pixel visiting all four dither values during the four frames. See page 13 of Appellants’ specification. Also note that a table for each of the frames, frame 0, frame 1, frame 2, and frame 3 are shown on page 13. The M-bit video signal is fed to a summing device 52, where a spatial-temporal dither value and a random value source is added to the M-bit signal. See page 14 of Appellants’ specification and figure 5. The random value dither breaks up spatial patterns but does not contribute a temporal component, which can tend to result in each pixel converging to a higher resolution signal over time. See page 15 of Appellants’ specification. 2Page: Previous 1 2 3 4 5 6 7 8 9 10 NextLast modified: November 3, 2007