Ex parte STEWART - Page 12




          Appeal No. 98-1207                                        Page 12           
          Application No. 08/420,648                                                  


          materials which fall through screen 18 pass onto finer screen               
          20.  Here, again, the coarser materials 34 are retained above               
          screen 20 while the finer materials 32 pass through to                      
          collector plate 22.  The relatively coarser materials 34 on                 
          the top of screen 20 are urged to flow downward toward the                  
          front of the machine where they are collected on conveyor belt              
          30, which carries them to the right of the machine and into                 
          trench 44.  The finer materials which pass through screen 20                
          are                                                                         
          collected by collector plate 22 and are urged to flow                       
          downward, toward the front of the machine, to conveyor belt                 
          26.  Conveyor belt 26 conveys the finest materials to the                   
          right of the machine where they are transferred by means of                 
          gravity to conveyor belt 28.  Conveyor 28 carries the finest                
          material, above conveyor 30, to the front of the machine for                
          padding the trench 44.  In operation, then, conveyor 28 places              
          the finest materials into trench 44, first.  Conveyor 30                    
          follows with a coarser material and the coarsest materials are              
          deposited into the trench, last, or onto the ground, according              
          to the way the machine is set up.                                           









Page:  Previous  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  Next 

Last modified: November 3, 2007