Appeal No. 97-2035 Application 08/161,234 recording surface at least when the disk is at rest; ii) a magnetic transducer mounted in the slider for writing and reading data to and from the magnetic recording surface of the electrically conductive storage disk; and iii) an electrically conductive coating applied to at least one surface of the slider for facilitating the discharge of electrostatic charge on the slider; and c) an electrically conducting path connected to the slider/head assembly electrically conductive coating and to the electrically conductive storage disk for discharging triboelectrically generated charge on the slider head assembly. 9. A method for reducing debris accumulation in a magnetic disk storage system comprising a disk having an electrically conductive base with a magnetic recording surface, and a slider/head assembly including a magnetic transducer in close proximity to the magnetic recording surface when writing data to or reading data from the disk and having a load- bearing surface in contact with the magnetic recording surface when the disk is not rotating, the method comprising the following steps: a) forming an electrically conductive surface area on the slider/head assembly except in the proximity of the magnetic transducer; and b) electrically connecting the electrically conductive surface to the electrically conducting disk base for discharging triboelectrically generated static charges on the slider/head assembly. 5Page: Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 NextLast modified: November 3, 2007