- 117 -
estimated number of customers the system will serve, and the
basic outline of the three phases of the LMS plan; however, these
documents do not detail the property needed for the LMS, nor do
they provide the amount of property needed for the system.
With respect to the request for engineering assistance,
petitioner argues that this document “defined ‘the scope of the
work that they wanted engineering to perform.’” Specifically,
the request for engineering assistance states:
Desired Project Considerations:
A. Provide PC/M to:
1. Replace ICW thermometers TI 1415 thru TI 1420
inclusive in existing thermowells with ‘K’
type thermocouples.
2. Replace CCW thermometers TI 633 A, B, & C and
TI 663 A, B, & C in existing thermowells with
‘K’ type thermocouples.
3. Install permanent wiring from thermocouples
installed in #1 & 2 to rotary selector
switch.
4. Please provide connections to read the output
of the selector switch (Item #3) via: (a)
plug, (b) two foot extension cord with ‘K’
plug end, and (c) terminal posts.
5. Locate Items 3 & 4 in weather proof box with
door and locate box on east wall of CCW heat
exchanger room near the ICW flow meters, so
that both temperature and flow can be read at
one location
6. Provide and locate portable readout similar
to those listed in B.2 below within the
weather proof box.[103]
B. Considerations:
103 Desired project consideration A.6. is a handwritten
entry, whereas all of the other desired project considerations
are typewritten.
Page: Previous 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 NextLast modified: May 25, 2011